Jeg er født d. 11/7-2009 på Svendborg Sygehus kl. 15.32 Jeg vejede 4350 g og var 54 cm lang.
Du kan læse min dagbog, se billeder og følge hvor hurtigt, at jeg vokser. Du kan også skrive til mig. Hej!!!
This is normally carried out with ejector pins in the software that are coupled through an ejector plate to a hydraulic actuator, or by an air operated ejector valve on the face of the mould software. The moulding might free fall into a group box or onto a switch conveyer, or could also be} eliminated by an automated robotic. In semi-automatic mode, the Waterproof Electric Lighters operator might intervene at this point in the cycle to take away the moulding manually. Once the moulding is evident from the mould software, the whole moulding cycle can be repeated.
This is normally carried out with ejector pins in the software that are coupled through an ejector plate to a hydraulic actuator, or by an air operated ejector valve on the face of the mould software. The moulding might free fall into a group box or onto a switch conveyer, or could also be} eliminated by an automated robotic. In semi-automatic mode, the Waterproof Electric Lighters operator might intervene at this point in the cycle to take away the moulding manually. Once the moulding is evident from the mould software, the whole moulding cycle can be repeated.
SvarSlet